Is an axle the same as a drive shaft? While both axle and driveshafts transfer mechanical power from one place to another, they serve different functions in a vehicle's drivetrain. The driveshaft transfers power from the transmission to the rear differential gearbox. The axle shafts transfer power from the rear differential gearbox to the wheels. Construction
How much does it cost to replace an axle shaft?
Axle Shaft Replacement Cost - RepairPal Estimate. Labor costs are estimated between $157 and $198 while parts are priced between $723 and $761. This range does not include taxes and fees, and does not factor in your specific vehicle or unique location. Related repairs may also be needed.
What are the symptoms of a bad axle shaft?
Is the drive shaft connected to the axle?
The driveshaft is a cylinder, usually made of steel or sometimes aluminum, which connects the rear differential and your transmission. It works together with an axle and CV joint to allow torque from the transmission to reach the wheels and drive your vehicle at a steady speed.
What happens when drive shaft goes bad?
A broken driveshaft can prevent wheels from turning properly, giving you trouble when trying to make turns. This issue limits your overall control of the car. You need any issues that prevent you from driving the car correctly addressed right away for safe driving and continued use of the vehicle.
Related question for Is An Axle The Same As A Drive Shaft?
What causes a drive shaft to break?
Usually drive shaft issues can be attributed to aftermarket engine modifications (more torque) or tires (more traction, and thus a higher peak torque through the shaft). In both those cases slight twisting of the shaft near the failure point will be visible.
Is your car totaled if the axle is broken?
If the crash results in a broken axle, dented or tweaked pillar (the parts that “hold up” the roof, including the front windshield frame, the part between your front and rear doors, and the rear roofline), or extensive damage to the drivetrain or under-hood components, you could be looking at a total loss.
How long does it take to replace an axle shaft?
It would take approximately 30 minutes to replace one axle. If a person actually wanted to repair an axle, if completely broken, then it would have to be welded. Welding an axle will not work, it weakens the steel to much to make it usable again. Front axles on most newer vehicles are a whole new game.
How long can you drive on a bad axle?
The answer will be relative from one CV axle to another. It could take weeks, months, or years. But the average lifespan of a bad CV axle is around five to six months. Knowing this does not merely mean to stretch the deadline a little bit.
How do you know if your car axle is damaged?
Can a bad axle cause transmission problems?
Can a bad axle cause transmission problems? yes a bad axle can cause your transmission to go bad. it can cause transmission leaks due to a damaged seal if you grab the axle closest to the inner joint near the transmission and you can move it up and down that is a sign the differential in the transmission is worn.
What causes a broken axle?
What causes a broken axle? If your car shocks are becoming worn, hitting any bump or pothole in the road could cause damage to your car axles. Because the axle is constantly rotating and flexing to accommodate different road conditions, it can wear out and fail, resulting in a broken axle.
How much does it cost to fix a car axle?
The cost to repair an axle runs between about $500 and $600 dollars before taxes and fees. Costs vary depending the type of vehicle, brand, make, and model. Labor costs vary from between about $50 dollars and $140 depending on how long the job takes for a model of vehicle.
Do all cars have drive shafts?
Drive shafts are used differently in different vehicles, varying greatly in cars with distinct configurations for front-wheel drive, four-wheel drive, and the previously mentioned front-engine rear-wheel drive. Other vehicles also use drive shafts, like motorcycles, locomotives, and marine vessels.
How much weight can I have on my drive axle?
In addition to Bridge Formula weight limits, Federal law states that single axles are limited to 20,000 pounds, and axles spaced more than 40 inches and not more than 96 inches apart (tandem axles) are limited to 34,000 pounds. Gross vehicle weight is limited to 80,000 pounds (23 U.S.C. 127).
How do I know if my drive shaft needs replacing?
Can you drive with broken drive shaft?
Can you drive with a broken drive shaft? Yes, you can still drive with a faulty drive shaft but it is not recommended to do so for long. The drive shaft can also fall and get wedged between your car and the ground, disabling you to make any forward movement.
What do bad U-joints feel like?
A bad u-joint can cause a clunking sound or jerkiness while driving, particularly when letting off of and pressing the accelerator. A bad u-joint can also cause vibration at certain speeds, emanating from the center or rear of the vehicle.
What noise does a bad drive shaft make?
Generally speaking, a bad drive shaft is going to create a kind of rattling or clunking sound. You may also hear sounds that are like a high-pitched squeaking or a scraping noise of metal on metal. All of this will originate from underneath your car, rather than in the engine compartment.
Is it worth fixing a broken axle?
Q : Is a broken axle repairable? In most cases, replacement is the best way to fix a bent or broken axle. Patching up an axle crack or break is too risky, as it can fail while you're driving.
Can you push a car with a broken axle?
A broken axle will eventually stop a vehicle dead in its track. When the axle breaks at the joint it won't be able to transfer power to the wheels. When you go to step on the gas the wheels won't move.
What happens if your axle is bent?
A badly bent axle will quickly cause damage to CV joints, and it's possible to damage your wheel hubs, bearings and other components. It can also damage the mounting flange where it attaches to the differential (in a rear-wheel drive vehicle), and possibly cause internal damage to the differential gearing.
Is it hard to replace an axle?
Replacing a front-wheel-drive axle is straightforward, although physically demanding. Get the replacement axle before you start, as well as a new spindle nut and a cotter pin or two. You'll need both wheels off the ground to allow enough suspension droop. You'll need a big socket to remove the spindle nut.
Is a CV joint hard to replace?
replacing both sides shouldn't take any more than 4 hours. have your manual with you, you'd probably need to undo the cv lock nut, separate complete hub assembly from the strut, pull the cv out.
How often should you replace axles?
How often do front axles need to be replaced? Straight axles tend to fail less often than CV axles because of their heavy-duty nature. The typical front CV axle should last between 80,000 and 100,000 miles, but your driving style can significantly increase or decrease service life.
Can I drive without a CV axle?
Yes you can drive your truck with out cv joints. But you do need part of the cv joint . If that makes any sence. If you break a cv joint pull it apart and remove the joint of the cv closes to the wheel.Be sure to remove the other parts of the cv joint not used.
How long does it take for an axle to break?
How long does it take for an axle to break? Once you take it to a mechanic, it may just take about one hour to fix one side of the axle. It does not matter whether it is the front or rear axle, putting it in place and repairing it might take an hour. However, to replace both axles will take more than one hour, anyway.
How important is a CV axle?
The axle connects to the wheels with a flexible joiner allowing the wheel to turn smoothly. These are known as the constant velocity axle or joint. They help make turns smoother and give the wheels flexibility. Without them, when making a turn the wheel would catch up on the shaft, making for a less than smooth turn.
How do I check my axle?
What can damage an axle?
Causes of Broken Axles
Should you replace axles in pairs?
there is no need to replace cv axles in pairs as long as the other axles are in good condition. there are many aftermarket cv axles on the market, but it's much smarter and safer to use either the factory part from the manufacturer or a replacement of equal quality.
Can transmission fluid leak from axle?
yes a bad axle can cause your transmission to go bad. it can cause transmission leaks due to a damaged seal if you grab the axle closest to the inner joint near the transmission and you can move it up and down that is a sign the differential in the transmission is worn.