How do you use awlgrip high build primer? Application Instructions
Spray: Apply Awl-Grip High Build Epoxy Primer in even coats of 8 to 10 mils (200-250 microns) wet film thickness yielding 4 - 5 mils (100 to 125 microns) DFT. Two to three coats may be needed. Note: Do not apply to surfaces warmer than 105 F or colder than 55 F.
What is the mix ratio for awlgrip?
Roller/Brush Mix 2 parts Awlgrip Topcoat Base Component with one part Awl Cat #3/H3002 brushing converter until one smooth homogenous mixture is obtained. Reduce 25-33% with T0031. Overall mixture is 2:1:3/4-1 by volume. Application Instructions General: Sanded surface must be dry and clean.
How thick can high build primer be?
High-build primer/surfacers can contain 66% solids by weight, and they go on thick, around 20 or 25 mils wet, which is equivalent to four or five coats of regular paint. These products can fill sanding scratches, smooth drywall fuzz, and hide other small surface imperfections.
How do you mix all grip paint?
Spray: Mix by volume one part AWLGRIP Topcoat Base Component (Color) with one part AWL-CAT #2 G3010 spray converter to a a smooth homogenous mixture. Reduce up to 25% with the spray reducer(s) appropriate for conditions. Overall mixture is 1:1:1/2 volume. Example: 8oz Base, 8oz G3010, 4oz Reducer.
How do you prepare Awlgrip paint?
Related question for How Do You Use Awlgrip High Build Primer?
Is awlgrip epoxy paint?
Awlgrip 545 is a two component epoxy primer with corrosion and adhesion properties for steel, aluminum, wood, and fiberglass substrates.
How long does it take for awlgrip to dry?
Anticipated Cure Time at 77°F/50% R.H: 24 hours to tape free; 3 days to light service; 14 days for full cure. Recoatability: Spray applications consist of three or more coats applied over 1-4 hours.
Can high build primer go on bare metal?
If you are talking about those tiny rust spots in the pictures you posted I would scuff the primer down to bare metal to remove any rust then spray high build primer over those spots. Some purists will tell you you can't do it that way. That epoxy primer must be used over ALL bare metal.
Can you spray bare metal over high build primer?
If you sprayed a 2K filler primer on bare metal (and its NOT a D.T.M. primer) you need to strip it back off. It will not adhere.
Does high build primer work?
High build primes gives you an even surface for the paint to absorb evenly. You can use it, but it won't benefit you other than priming the substrate, depending on which hb primer you use. Some require a additional primer. SW high build is good and does not.
What will high build primer cover?
High build primer can be a god send if you have a small imperfection in a panel, you can hide small scratches,small dents,etc etc as long as you know what you are doing. I generally will put 2 or 3 good coats on an iffy panel, let it dry then dust with a dark spray can then wet flat back with 800.
Can you put body filler over high primer?
Plastic filler will work fine over primer or paint just rough it up with 80 grit first to get a strong bite.. There are automotive primers made by SEM that work very good. Acid etch for bare metal and high build but two part catalyzed urethane or epoxy is still the best but you will need a compressor and spray gun.
Is Awlgrip paint water based?
Awlcoat TPC is a water-based protective coating, providing a temporary peelable layer to guard surfaces against scuffing, abrasion and other damage.
What does awlgrip reducer do?
Awlgrip T0005 is a Hot Weather Reducer/Retarder use to reduce AWLGRIP® Topcoats and improve flow and leveling when application and cure temperatures are above 85°F.
Is high build primer flexible?
High-Build Primer Surfacer is a flexible acrylic coating for priming steel, aluminum, urethane, fiberglass and plastics.
Should you wax Awlgrip paint?
1. Do not use traditional waxes. Traditional waxes which contain no abrasives probably do little harm to the coating, but offer no benefit. Awlgrip has developed Awlcare Protective Polymer Sealer 73240 for those who want to enhance their finish and need the additional cleaning power of a hand applied, dry wash product.
How do you mix Awlfair?
High Build must be sanded prior to application of Awlfair LW. Mix 1:1 by volume (as supplied). Mix the two components thoroughly to a uniform pink colour with no streaks or lumps. Warning: Do not add any thinners or reducers to Awlfair LW.
How good is Awlgrip paint?
Awlgrip offers many colors and the ability to match any color you already have. Awlcraft 2000 is acrylic Polyurethane. It's a tough, durable finish and a forgiving topcoat. Because of its quick curing, it is a great choice for imperfect painting surroundings.
How long does awlgrip 545 take to dry?
Allow to cure for 12-16 hours. advice if necessary. For wood substrates, first seal the wood with a light coat of 545 Epoxy Primer (spray) reduced 40% with T0006. Allow to cure for 12-16 hours.
How long will awlgrip last?
Apply a topcoat. Awlgrip – may be brush rolled or sprayed – usually lasts 7-10 years.
Can awlgrip be used below waterline?
Awlfair FL can be used above and below the waterline via manual application.
Can you buff Awlgrip paint?
Yes, it can be buffed. It can be "color sanded" with extremely fine paper (wet) say 2,500 to 3,000 grit. Or you can use a cutter or a polish.
Can you roll on awlgrip?
Who makes Awlgrip paint?
A new single-stage repairable topcoat.
What primer is best for bare metal?
Epoxy primer works best on bare metal and is recommended for newly-fabricated metal parts or those that have been fully stripped. You can also apply primer surfacer or filler over epoxy primer to get rid of any minor imperfections and to create a flat surface before you paint.
Do you have to use etch primer on bare metal?
Both Epoxy Primer and Self-Etch primer (Self-Etching primer) can be used on bare metal. If you're doing some body work and you have some bare metal, you don't want to just put regular primer surfacer because it does not have the corrosion properties like Epoxy or Self-Etch.
What is urethane primer used for?
Mar-Hyde Ultimate 2K Urethane Primer Surfacer is formulated to provide a fast-drying, high-build film that has excellent adhesion, easy sanding properties and excellent color holdout. It is designed to be used on properly prepared steel, aluminum, iron, fiberglass and previously painted surfaces.
Can you put sealer on bare metal?
Epoxy primer seals metal from the atmosphere and also acts as a barrier between different coatings if you want to layer between products. Epoxy primer can be used on most anything from bare metal to over top of body filler and old paint.
What to do after sandblasting?
After sandblasting, the metal object must be thoroughly cleaned to remove all traces of dirt and grease as well as residual traces of sand that will interfere with the paint.
Can I spray 2K primer over paint?
Yes, you definitely can!
You can put a 2K car spray paint over a 1K car paint.
What is the purpose of a high build primer?
The high build primer adds a relatively thick coating of paint which is sandable and is used to remove the imperfections in the panel. Normally two coats of high build primer will be sufficient. High build primer is available in cellulose and 2-pack.
How do you mix Slick sand primer?
Do you have to sand filler primer?
DRY & RECOAT
When dry, the surface can be immediately recoated, top coated or wet sanded. For best results, allow Filler Primer to dry for 1 hour before dry sanding. Test in an inconspicuous area to be sure Primer is dry enough for sanding. Block sand the area using 320-400 grit sandpaper.